Concept Turntable Features: • Aluminum radiused high mass plinth with compact footprint • 2 piece Delrin 30mm thick platter • Polished tempered steel bearing shaft within sintered bronze bushings (not CMB) • Mirror polished teflon thrust pad • Belt-driven by a decoupled DC motor incorporating an extremely low noise bearing • 33, 45 and 78 rpm at a turn of a dial • Verify tonearm features a friction-free magnetic bearing • Verify tonearm includes a hardwired phono cable with ground wire. • 120volt 60Hz
Concept Turntable Specifications: Construction details: Resonance-optimised chassis, Friction free tonearm with magnetic bearing technology Speed ranges: 33 1/3, 45 and 78 RPM Drive unit (motor): Decoupled DC motor with low noise bearings Bearing: Polished and tempered steel shaft in a sintered bronze bushing, runs on a mirror of Teflon Platter: Black coloured POM, 30 mm thickness Speed variation: ±0,04 % Tonearm Cable Length: 1 meter Weight: approx. 7,5 kg (16.5 lbs) incl. motor, tonearm and cartridge Dimensions (W/D/H in inches): approx. 16.54 x 13.78 x 5.51 Dimensions (W/D/H in mm): approx. 420 x 350 x 140 Warranty: 1 year, extended to 2 full years with the return of warranty form and receipt.
Concept MC Cartridge Specifications: Output: 0.42mV at 5cm/s Weight: 8.0grams Stylus Shape: Micro Line Cantilever: Boron Coil Material: OFC - Copper Compliance: 9/9 u/mN Recommended Tracking Force: 2.0 gram Crosstalk: Greater Than 30dB Channel Difference: Less Than 0.5dB Cartridge Impedance: 11 Ohms Cartridge Body: Aluminum-Magnesium Alloy with Ceramic Surface Layer